基于LabVIEW平台的数字抽取滤波器的设计与应用

介绍了基于LabVIEW平台的数字抽取滤波器的设计。该方法是对高采样率的数据进行低通数字滤波，然后对结果用1／K倍重新采样，将数字信号频带压缩K倍，从而实现动态测试较大的动态范围要求和划分频带要求，数字抽取滤波器的设计包含调制，数字滤波和抽取三方面，LabVIEW是一种基于图形编程语言（G语言）的开发环境，采用交互界面设计，模块化编程，该滤波器也是作者正在研制的动态测试分析虚拟仪器的一个重要组成部分。本文给出了在LabVIEW平台上所进行数字抽取滤波器的设计原理，仿真结果和在动态数字信号分析中的应用。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

开发月球车用的月表环境的地面模拟方法研究

当前中国正在进行自己的探月工程,预计将会发射月球车登陆月球表面.在研制月球探测器过程中,为了在地面验证月球车的可靠性和各项功能(如着陆冲击、自主巡航和遥控),必须建立相应的地面试验中心.根据目前对月球表面环境的认识和现有的仿真技术,文章提出了实现月表综合环境模拟的试验设施的设想.由于月球表面环境非常恶劣并且月表的地形也非常复杂,文章提出了一种组合式月表环境模拟器的设想.主要部分是模拟各种月貌特征(如陨石坑、斜坡、沟壑等)的可移动单元.每个单元是一个用模拟月壤制作的小沙盘,其化学成分、组成颗粒分布和力学性能和已经获取的真实月壤样品相似.根据不同的试验要求,选择相应的单元按照一定的规律组合成为试验场.这样在有限的场地面积内可以按需实现对月表不同地域的地貌特征模拟.同时,可以选择少量单元的组合构成更小规模的试验场,以方便与其它环境模拟器(如落塔,热/真空容器等)联合,实现模拟月表的综合环境.     

航天器舷窗玻璃超高速撞击损伤与M/OD撞击风险评估

用北京卫星环境工程研究所的18mm口径二级轻气炮(TLGG)和20 J激光驱动微小飞片装置(LDFF-20)对用作航天器舷窗玻璃的熔融石英玻璃的超高速撞击损伤特性进行了实验研究和分析.其中,TLGG发射的球形铝弹丸直径分别为1 mm和3 mm,速度2～6.5 km/s;LDFF-20发射的圆柱形飞片厚度7 μm,直径1 mm,速度1～8.3 km/s.撞击结果为:对12 mm厚的熔融石英玻璃,直径为3mm的弹丸甚至在2.8 km/s的低速下就将其穿透,而直径为1 mm的弹丸在6.5km/s的高速下没有穿透,这说明弹丸直径对撞击损伤特性有很强的影响;LDFF-20发射的微小飞片的撞击仅在玻璃表面产生很浅的凹坑,没有裂纹产生,但微小飞片的累积撞击损伤明显地降低了玻璃的透光性.实验初步获得了侵彻深度PC、侵彻直径D1与弹丸撞击速度Vp、弹丸质量Mp之间的经验关系.依据实验结果和目前的微流星体/空间碎片(M/OD)环境工程模型,建议对于高度为400 km、轨道倾角42°、寿命为3年的典型航天器,其舷窗玻璃的临界安全(非穿透)厚度至少为12mm.     

捷联惯导系统大方位失准角下的非线性对准

采用欧拉角描述平台坐标系与导航坐标系间的失准角,推导了适用于捷联惯导系统的非线性误差方程,证明了该方法仅适用于方位误差角为大角度,而水平误差角为小量的情况。数学仿真表明:在方位误差角为大角度情况下,采用所推导的误差方程和非线性滤波技术能获得更高的估计精度。     

国外弹道导弹被动段控制技术

本文在论述弹道导弹被动段控制重大意义的基础上,阐述了国外几种型号导弹的被动段控制方法及其实施途径;介绍了再入飞行器滚动控制方法;对再入段减速的几种方案进行了探讨和分折比较。